ETPS Series Durable Self-suction Pump for Living Water with Base
View All Products
en
Used for Tap Booster
Power: 0.37kw/0.5hp-0.9kw/1.2hp
Max. flow: 40-60L/min
Max. Head: 35-50m
Inlet / Outlet: 1"x1"
The ETPS Series Intelligent Mass Flow No Rust Self-suction Pump with Tank is a cutting-edge product that offers exceptional performance and reliability for all your water pumping needs. Whether it's for residential, commercial, or industrial applications, this pump is designed to deliver outstanding results.
Application :
Suitable for transfering clean water or other liquids similar to water in physical andchemical properties.
As a result ofcompactness,reliability they are easy to use and recommended forusing in domestic and civil applications such as distribution ofwater in consumptionwith small pressure sets, for the irrigation of gardens and allotments, for drawingwater from tanks and other situations where air or water maybe present in thewater to be pumped.
The pump comes complete with a flap-check valve.The pump should be installedin an enciosed environment, or at least sheltered from inclement weather.
Widely used in living water supply,water tower water supply,automatic irrigationsystem,well water lifting, various corollary equipments, etc
Pump details :
Cast Iron Body and Support: Special anti-rust treatment for durability.
Brass Impeller and Rust-free Copper Inserts: Ensuring smooth restart after long periods of inactivity.
AISI 304 Stainless Steel Shaft: Guaranteeing rust-free water contact areas.
Maximum Liquid Temperature: +60℃, suitable for hot water applications.
Maximum Suction Height: +9m, capable of handling high vertical lifts.
Motor Specifications :
Durable Copper Wiring: For longer lifespan and enhanced performance.
High-Efficiency C&U Bearings: Ensuring smooth operation.
Built-in Thermal Protector: With overheating protection for single-phase motor.
Insulation Rating: Class F, for reliable electrical insulation.
Protection Rating: IP44, ensuring safety against water ingress.
Maximum Ambient Temperature: +40℃, suitable for various environments.

|
Materials Table |
||
|
NO. |
Part |
Material |
|
1 |
Pump Body |
HT200 |
|
2 |
Pressure Sensor |
|
|
3 |
Tank |
|
|
4 |
Flow Sensor |
|
|
5 |
Impeller | Brass |
|
6 |
“ O ” ring | |
|
7 |
Mechanical Seal |
Carbon/Ceramic |
|
8 |
Base |
|
|
9 |
Terminal Cover |
|
|
10 |
Shaft And Rotor |
|
|
11 |
Support |
HT200 |
|
12 |
Motor Case |
Aluminum |
|
13 |
Fan Cover |
|
| Model | Power | Inlet x Outlet | Max. Flow | Max. Head | Max. Suction | |
| KW | HP | (L/min) | (m) | (m) | ||
| ETPS-370 | 0.37 | 0.50 | 1"x1" | 40 | 35 | 9 |
| ETPS-550 | 0.55 | 0.75 | 1"x1" | 50 | 40 | 9 |
| ETPS-750 | 0.75 | 1.0 | 1"x1" | 55 | 45 | 9 |
| ETPS-900 | 0.90 | 1.2 | 1"x1" | 60 | 50 | 9 |
Water-based solar pumping systems are increasingly used in off-grid irrigation, livestock supply, and remote water deliv...
READ MOREDeep-well pumping systems operate under conditions where direct observation is impossible, which makes fault diagnosis h...
READ MOREModern hydronic systems increasingly rely on adaptive control logic instead of fixed-speed operation. An Intellige...
READ MORE
Carbon steel flange Working temperature: -10°C~99°C (Butyl) -10°C~99°C (EPDM) 0°...
See Details
Replaceable membrane pressure tanksCarbon steel flangeWorking temperature : -10°...
See Details
Energy Efficiency Hot And Cold Water Circulation Pump Inlet / Outlet : 2" x 2" ...
See Details
Rated input voltage : AC220V/50Hz-60Hz Rated output power : 0.18-1.5kW Protectio...
See Details
Manually operationcontrol box of single-phaseFor motor power no more than 3kW(4H...
See Details
Manually operationcontrol box of three-phaseFor motor power no more than 15kW(20...
See Details










